MiSTeryNano can be used on the Tang Console 60K/138k.
The Tang Console 60K/138k is bigger than most other boards supported my MiSTeryNano.
The Tang Console comes with DDR3-SDRAM as well as a slot for the Tang SDRAM. Using this board allows to use the same SDR-SDRAM memory access methods. DDR3 on the other hand is not supported by regular retro implementations like the MiSTeryNano.
The M0S required to control the MiSTeryNano is to be mounted in the middle PMOD with the help of the M0S PMOD adapter.
Note: Console 138k only supports internal BL616 MPU presently
An optional Plastation Dualshock 2 PMOD may by inserted in the second PMOD closer to the HDMI connector. A game controller in port P1 will then be mapped to the Atari ST's joystick port.
The firmware for the M0S Dock is the same version as for the Tang Nano 20K and all other boards.
Since the Tang Console 60K needs a bigger portion of the available flash memory space, the TOS ROMs need to be flashed to a different memory location on the Console 60K. The flash locations to be used are:
| Address | TOS slot |
|---|---|
| 0x500000 | Primary ST TOS |
| 0x540000 | Primary STE TOS |
| 0x580000 | Secondary ST TOS |
| 0x5c0000 | Secondary STE TOS |
Since the Tang Console 138K needs a bigger portion of the available flash memory space, the TOS ROMs need to be flashed to a different memory location on the Console 138K. The flash locations to be used on the Tang Console 138K are:
| Address | TOS slot |
|---|---|
| 0x900000 | Primary ST TOS |
| 0x940000 | Primary STE TOS |
| 0x980000 | Secondary ST TOS |
| 0x9c0000 | Secondary STE TOS |