Solidus 3

[ViciousMagician]

This project appears abandoned as it has not been updated in some time. I wanted to open an issue to see if there was anyone left that had any interest in upgrading it to work with current solidus version. @acreilly

[jeremygpeterson]

@ViciousMagician I'm using this gem too, it's critical to what I'm working on.

[dhonig]

@jeremygpeterson feel free to send along PR's with any updates

[jeremygpeterson]

@dhonig Appreciate the opportunity to contribute! Just checking if the project is still active before I dive in. Also, could you shed some light on the process for reviewing and merging pull requests, such as #22? Thanks!

[ViciousMagician]

@jeremygpeterson You can check out the fork i just pushed up. I had a local version that works with 3.0.8. never tested beyond that.

[tjzijlstra]

Is this linked fork still the latest version? I'm looking into upgrading this extension for use with Solidus 4.

[dhonig]

@thijszijlstra This is probably the latest version, what is your use case? There might be other extensions that are better suited....Otherwise I think there would be others interested in seeing this extension updated.

[tjzijlstra]

@dhonig Thanks for your response!

The store sells roofing materials with a variety of customization options.

Insulation Customization:

• Values ranging from 3.5 to 10.0. These values in between are fixed, but not every value can be selected for each product.

Length Customization:

• Fixed lengths: Some materials are available in fixed lengths ranging from 100 cm to 160 cm in steps of 10 cm.
• Variable lengths: Other materials can be cut to any length between 200 cm and 800 cm, accurate to the nearest centimeter. For example, customers can order a piece that is exactly 351 cm long.

Angle Customization:

• Cut angles: The angle can be customized from 25 degrees to 60 degrees in steps of 5 degrees. There is also an option to keep the edge uncut at an angle.

Not sure if this extension is the best fit in its current form, maybe I should rewrite this in a more reusable and global solution for Solidus 4. Any tips and/or help is greatly appreciated!

[tjzijlstra]

Hi @dhonig, has been a while. I just got back from holidays, do you think that this would fit my use case? If so, I'll start working on the solidus 4 upgrade.