Environment
- macOS Sonoma 14.7.x
- macOS Sequoia 15.x (same result)
- OpenCore (latest)
- SIP: Custom configuration (csr-active-config = 030A0000)
- SecureBootModel = Disabled
Adapter
MediaTek MT7601
Vendor ID: 0x148F
Product ID: 0x7601
Manufacturer: MediaTek
Adapter model:
NEXT 4AA
Driver
D-LinkUtility-Package
Wifi Utility version: 2.4.0.0
What happens
The USB adapter is correctly detected.
system_profiler SPUSBDataType:
802.11 n WLAN
Vendor ID: 0x148F
Product ID: 0x7601
Manufacturer: MediaTek
The driver is loaded:
kmutil showloaded | grep RT2870
Result:
com.Ralink.driver.RT2870USBWirelessDriver (5.0.1)
The network interface is also created:
networksetup -listallhardwareports
Hardware Port: 802.11 n WLAN
Device: en1
ifconfig en1:
Wifi Utility always displays:
Additional information
- I also tested on macOS Sequoia with exactly the same result.
- I also tested another supported adapter based on RT5370 (VID 148F / PID 5370).
- Same behaviour.
- Driver loads successfully.
- Interface is created.
- Wifi Utility still shows "No Connection".
No kernel panic.
No obvious driver errors.
Kernel log only shows:
Is this a known issue with MT7601 / RT5370 on recent macOS versions, or is there anything else I should check?
Environment
Adapter
MediaTek MT7601
Adapter model:
NEXT 4AA
Driver
D-LinkUtility-Package
Wifi Utility version: 2.4.0.0
What happens
The USB adapter is correctly detected.
system_profiler SPUSBDataType:The driver is loaded:
kmutil showloaded | grep RT2870Result:
The network interface is also created:
ifconfig en1:Wifi Utility always displays:
Additional information
No kernel panic.
No obvious driver errors.
Kernel log only shows:
Is this a known issue with MT7601 / RT5370 on recent macOS versions, or is there anything else I should check?